Caswell

Nickel/Acid Copper Combo Kit - 15 Gal

Includes a 15 Gal Nickel Plating Kit and a 15 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then...

Nickel/Acid Copper Combo Kit - 3 Gal

Includes a 3 Gal Nickel Plating Kit and a 3 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then polish...

Stainless Steel Blackener Gel Kit

Easily spot blacken stainless steel. Simply apply the gel where you want the blackening to occur. The gel keeps the blackener in place. Leave it on the part for 1-3 minutes and rinse off. Seal with...

Black Oxide Gel Kit

Easily spot blacken steel (not stainless) or iron. Simply apply the black oxide gel where you want the blackening to occur. The gel keeps the blackener in place. Leave it on the part for 1-3 minutes...

SCRUBBER WHEEL 6

Scrubber wheels remove rust, scratches, minor blemishes, old paint, and plating. A featherlite touch is required with these wheels, unlike an ordinary buffing wheel. Heavy pressure will result in...

Nylon Bristle Brush Kit

The next best thing to a sand blaster! Lasts up to 10 times the life of a wire wheel! Will not puncture skin Does not shed bristles - unlike dangerous wire wheels Will not rust and maintains its...

NYLON BRISTLE BRUSH 6"

The next best thing to a sand blaster! Lasts up to 10 times the life of a wire wheel! Will not puncture skin Does not shed bristles - unlike dangerous wire wheels Will not rust and maintains its...

NYLON BRISTLE BRUSH WHEEL 3"

The next best thing to a sand blaster! Lasts up to 10 times the life of a wire wheel! Will not puncture skin Does not shed bristles - unlike dangerous wire wheels Will not rust and maintains its...

TREATED RAZOR BUFF - 8"

1/8" thick treated, razor buffs are perfect for getting into tight work areas and between fins on cylinder heads. The treated material is tough, long lasting and flexible. Use with a cutting...

TREATED RAZOR BUFF - 6"

1/8" thick treated, razor buffs are perfect for getting into tight work areas and between fins on cylinder heads. The treated material is tough, long lasting and flexible. Use with a cutting...

DENIM BUFFING WHEEL - 8" x 1/2"

Our newest buffing wheel, the denim buffing wheel, is soft enough for any buffing application that calls for cotton wheels, but, because of the sturdy denim construction, it lasts much, much longer...

DENIM BUFFING WHEEL - 6" x 1/2"

Our newest buffing wheel, the denim buffing wheel, is soft enough for any buffing application that calls for cotton wheels, but, because of the sturdy denim construction, it lasts much, much longer...

DENIM BUFFING WHEEL - 4" x 1/2"

Our newest buffing wheel, the denim buffing wheel, is soft enough for any buffing application that calls for cotton wheels, but, because of the sturdy denim construction, it lasts much, much longer...

DOMET FLANNEL WHEEL - 8" X 1/2"

Domet flannel is very the softest available material, and this wheel is loosely stitched, so the layers of cloth flare out to give a wide angle ultra smooth polishing surface. Generally used with...

DOMET FLANNEL WHEEL - 6" X 1/2"

Domet flannel is very the softest available material, and this wheel is loosely stitched, so the layers of cloth flare out to give a wide angle ultra smooth polishing surface. Generally used with...