Anodizing Accessories

2 X 3 FOOT TITANIUM WIRES

2 x 3 foot long Titanium Wires, for hanging parts into the anodizing tank.

Aluminum Blue Chromate & Anodize Sealer - 1 Pint

Our NEW Aluminum Blue Chromate and Anodize Sealer is a revolutionary product that can be used in the following ways: A Non Hexavalent Chromate On Bare Aluminum (imparts a slight blue to purple color on parts) - ROHS Compliant A primer for paint and...

Aluminum Brightener

Cleans and brightens aluminum, stainless steel, copper, brass, and non-ferrous metals. In just seconds, the industrial strength formula dissolves grease, oil stains, grime and road film. Dilute 4-6 oz per gallon of water depending on the cleaning job...

Aluminum De-Oxidizer & De-Smut 5 Gal - Makes 40 Gals

Mix 1 Quart Into 2 Gals Distilled Water In a HDPE Tank. Always add into water. Never add water into this product.Operate at 70-110 deg F. Immerse aluminum part for 1-3 minutes.

Aluminum Degreaser Powder - 10 lb Makes 15 Gallons

This special degreaser for Aluminum quickly cleans any aluminum alloy without etching. Mix 10 lbs of cleaner with 15 gallons of distilled water in a stainless steel container. Heat to 130 deg F on a hotplate. Immerse aluminum parts for 3-10 minutes prior...

Aluminum Degreaser Powder - 2lb Makes 3 Gallons

This special degreaser for Aluminum quickly cleans any aluminum alloy without etching. Mix 2 lbs of cleaner with 3 gallons of distilled water in a stainless steel container. Heat to 130 deg F on a hotplate. Immerse aluminum parts for 3-10 minutes prior...

ANODIZE & CHROME STRIPPER - 8 OZ

8 fl oz of stripping solution. To strip anodize, immerse parts for 5-30 minutes. To strip chrome, use a stainless steel wand and 12V DC. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA. Please call +1...

ANODIZE & CHROME STRIPPER

Anodize & Chrome Stripper is a super fast commercial grade stripper. It outperforms all others in speed and quality. Does not attack the aluminum. 1 lb of powder makes 3 gallons. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping...

ANODIZE FUME SUPPRESSANT

2 fl oz bottle Add One Teaspoon fume suppressant to a 5 gallon anodizing bath. Each 2oz bottle contains 10 doses.  Re-dose when fumes are detected. DO NOT OVERDOSE.  

ANODIZING COLOR WHEEL

The color wheel helps the anodizer, or painter, to decide which colors to mix to achieve their desired results.

Anodizing Sealant - 1 lb

Nickel Acetate based sealer. Use at the rate of 1 oz to 1 gal of water. This 1 lb bag makes 16 gallons. Bath life is 14-60 days, depending on use. Heat to 210 deg F, and seal for 5-30 minutes.

Deoxidizer/Desmut - 1 Quart

1 Quart mixes with 2 gallons of water. Use to minimize smutting of aluminum parts before anodizing or plating. Use at 70-110 deg F, for 1-3 minutes. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

GP PLATE - 20" x 20" x 1/32"

"General Purpose" plates. Ideal for larger anodizing systems (use as cathodes), or stripping tanks. Lead sheet is 1/32" thick. Can also be used as an anode when chrome plating.

GP PLATES 8 x 8

"General Purpose" plates. Ideal for larger anodizing systems (use as cathodes), or stripping tanks. Lead sheet is 1/32" thick. Can also be used as an anode when chrome plating.

GREEN MASKING 1/2" DOTS - 2000 PER ROLL

2 mil thick, 1/2" Diameter Polyester Dots Ideal for masking screw holes etc. Perfect for Powder coating, anodizing, plating, painting Withstands Up to 400°F