Powder Coating Accessories

BLACK OXIDE CONCENTRATE 1 QT

Blackens steel and iron parts (not stainless steel). Parts must be sealed after blackening. Use our Penetrating Sealer or Caswell Sealer. Mix 1 part Concentrate with 9 parts distilled water. 1 quart of concentrate makes 2.5 gallons of blackening solution...

Bronze & Blackening Solution 8 fl oz

Bronze & Blackening Solution For use on Copper and Silver. Mix 1-2 fluid oz of Concentrate to 1 gal water depending on degree of effect required. Use at room temperature. Dip item into solution for 5-10 seconds, longer for darker effect. Rinse to stop...

GREEN MASKING 1/2" DOTS - 2000 PER ROLL

2 mil thick, 1/2" Diameter Polyester Dots Ideal for masking screw holes etc. Perfect for Powder coating, anodizing, plating, painting Withstands Up to 400°F

HANDHELD IR THERMOMETER

Probably the most useful tool in any powder coater's toolbox - accurate temperature readings are essential to good coatings. Curing cycles are determined by part temperature, not oven temperature, and there's no way to accurately measure part temperature...

High Temp PC Tape - 1"

High Temperature Masking Tape Polyimide tape is perfect for high temperature masking needs. Withstands temps up to 600F. Copper colored Maximum Temperature: 500F Total Thickness: 2 mils Excellent Electrical Insulation

High Temp PC Tape - 1/2"

High Temperature Masking Tape Polyimide tape is perfect for high temperature masking needs. Withstands temps up to 600F. Copper colored Maximum Temperature: 500F Total Thickness: 2 mils Excellent Electrical Insulation

High Temp PC Tape - 2"

High Temperature Masking Tape Polyimide tape is perfect for high temperature masking needs. Withstands temps up to 600F. Copper colored Maximum Temperature: 500F Total Thickness: 2 mils Excellent Electrical Insulation

IRON PHOSPHATE PRIMER - 1 GALLON

Increase the corrosion resistance of your powder coated parts. Caswell Iron Phosphate Primer is a concentrated liquid, multiple temperature, detergent iron phosphate. It provides metal surfaces with a unique underpaint corrosion resistance and prepares...

IRON PHOSPHATE PRIMER - 1 PINT

Increase the corrosion resistance of your powder coated parts. Caswell Iron Phosphate Primer is a concentrated liquid, multiple temperature, detergent iron phosphate. It provides metal surfaces with a unique underpaint corrosion resistance and prepares...

POWDER COATING MASKING TAPE - 1

POWDER COATING TAPE - 2 MIL This 2 mil polyester tape has a 1.3 mil coating of a specially cured silicone adhesive that removes cleanly when exposed to temperatures that do not exceed 400 degrees F. An excellent general purpose tape for powder coating...

POWDER COATING MASKING TAPE - 1/2

POWDER COATING TAPE - 2 MIL This 2 mil polyester tape has a 1.3 mil coating of a specially cured silicone adhesive that removes cleanly when exposed to temperatures that do not exceed 400 degrees F. An excellent general purpose tape for powder coating...

POWDER COATING MASKING TAPE - 2

POWDER COATING TAPE - 2 MIL This 2 mil polyester tape has a 1.3 mil coating of a specially cured silicone adhesive that removes cleanly when exposed to temperatures that do not exceed 400 degrees F. An excellent general purpose tape for powder coating...

SILICONE CAP KIT

For Powder Coating, Plating, Anodizing or Painting Prevent powder coating, plating or anodizing from getting into sensitive areas. Withstands 600 deg F

SILICONE FLANGE KIT

For Powder Coating, Plating, Anodizing or Painting Prevent powder coating, plating or anodizing from getting into sensitive areas. Withstands 600 deg F

SILICONE PLUG KIT

For Powder Coating, Plating, Anodizing or Painting Prevent powder coating, plating or anodizing from getting into sensitive areas. Withstands 600 deg F