Caswell

Nickel/Chrome Combo Kit - 3 Gal

Includes a 3 Gal Nickel Plating Kit and a 3 Gallon Chrome Plating Kit. This combo kit is ideal for chrome plating parts that do not require a copper strike, such as polished steel. It's also useful...

Copy Chrome/Flash Copper Combo Kit - 4.5 Gal

Includes a 4.5 Gal Copy Chrome Plating Kit and a 4.5 Gal Flash Copper Plating Kit. Ideal for nickel plating ferrous metals like steel, iron & diecast/pot metal parts, where an alkaline copper strike...

Nickel/Flash Copper Combo Kit - 3 Gal

Includes a 3 Gal Nickel Plating Kit and a 3 Gal Flash Copper Plating Kit. Ideal for nickel plating ferrous metals like steel, iron & diecast/pot metal parts, where an alkaline copper strike is...

Nickel/Acid Copper Combo Kit - 15 Gal

Includes a 15 Gal Nickel Plating Kit and a 15 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then...

Nickel/Acid Copper Combo Kit - 3 Gal

Includes a 3 Gal Nickel Plating Kit and a 3 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then polish...

Stainless Steel Blackener Gel Kit

Easily spot blacken stainless steel. Simply apply the gel where you want the blackening to occur. The gel keeps the blackener in place. Leave it on the part for 1-3 minutes and rinse off. Seal with...

SCRUBBER WHEEL 6

Scrubber wheels remove rust, scratches, minor blemishes, old paint, and plating. A featherlite touch is required with these wheels, unlike an ordinary buffing wheel. Heavy pressure will result in...

NYLON BRISTLE BRUSH 6"

The next best thing to a sand blaster! Lasts up to 10 times the life of a wire wheel! Will not puncture skin Does not shed bristles - unlike dangerous wire wheels Will not rust and maintains its...

NYLON BRISTLE BRUSH WHEEL 3"

The next best thing to a sand blaster! Lasts up to 10 times the life of a wire wheel! Will not puncture skin Does not shed bristles - unlike dangerous wire wheels Will not rust and maintains its...

TREATED RAZOR BUFF - 8"

1/8" thick treated, razor buffs are perfect for getting into tight work areas and between fins on cylinder heads. The treated material is tough, long lasting and flexible. Use with a cutting...

TREATED RAZOR BUFF - 6"

1/8" thick treated, razor buffs are perfect for getting into tight work areas and between fins on cylinder heads. The treated material is tough, long lasting and flexible. Use with a cutting...

DENIM BUFFING WHEEL - 8" x 1/2"

Our newest buffing wheel, the denim buffing wheel, is soft enough for any buffing application that calls for cotton wheels, but, because of the sturdy denim construction, it lasts much, much longer...

DOMET FLANNEL WHEEL - 8" X 1/2"

Domet flannel is very the softest available material, and this wheel is loosely stitched, so the layers of cloth flare out to give a wide angle ultra smooth polishing surface. Generally used with...

DOMET FLANNEL WHEEL - 6" X 1/2"

Domet flannel is very the softest available material, and this wheel is loosely stitched, so the layers of cloth flare out to give a wide angle ultra smooth polishing surface. Generally used with...

5 AMP CC RECTIFIER

5 Amp Constant Current Rectifier Ideal for small anodizing runs, small plating jobs. Will anodize parts up to 1 sq ft. Will nickel & copper plate parts up to 70 sq in.   Other options: ...