Caswell

Flapper Adapter Metric M12 x 1.75

The Flapper Adapter mounts onto any angle grinder with a metric M12 x 1.75 shaft, and allows you to mount any wheel with a 1/4" shaft onto your angle grinder. Mount flap wheels, cutoff wheels,...

Flapper Adapter Metric M14 x 2.0

The Flapper Adapter mounts onto any angle grinder with a metric M14 x 2.0 shaft, and allows you to mount any wheel with a 1/4" shaft onto your angle grinder. Mount flap wheels, cutoff wheels, buffing...

Flapper Adapter 5/8 UNC Thread with 1/4" Collet - Extra Long

The Flapper Adapter mounts onto any angle grinder with a 5/8 - 11 shaft (almost all grinders), and allows you to mount any wheel with a 1/4" shaft onto your angle grinder. Mount flap wheels, cutoff...

FLAPPER ADAPTER - STANDARD - STAINLESS

The Flapper Adapter mounts onto any angle grinder with a 5/8 - 11 shaft (almost all grinders), and allows you to mount any wheel with a 1/4" shaft onto your angle grinder. Mount flap wheels, cutoff...

GRINDER/BUFFER ADAPTER 5/8-11 TO 1/2

This handy accessory fits a 5/8" shaft to extend the stubby shaft out 3" further from the motor body. Shaft size = 1/2" diam. The adapter will fit buffing wheels up to 1 inch thick    

BENCH MANDREL - 1/2

Attach these mandrels to an electric motor with a V Belt to make a HIGH QUALITY, low cost work station for various sanding, polishing and buffing operations. Will run wheels up to 1" thick...

BENCH MANDREL - 5/8 SHAFT

Attach these mandrels to an electric motor with a V Belt to make a HIGH QUALITY, low cost work station for various sanding, polishing and buffing operations. Will run wheels up to 1" thick...

CHUCK ADAPTER 0 - 1/2 C-4

This handy accessory turns an ordinary motor into a bench mounted drill. Just attach this adapter any 1/2" right threaded shaft or one of our shaft extenders. The Chuck Adapter is seen here fitted to...

CHUCK ADAPTER 0 - 1/4 C-2

This handy accessory turns an ordinary motor into a bench mounted drill. Just attach this adapter any 1/2" right threaded shaft or one of our shaft extenders. The Chuck Adapter is seen here fitted to...

ARBOR ADAPTER

These sturdy adapters are great for mounting, wire wheel brushes, grinding wheels, cut off wheels, buffs etc onto any chuck power tool. 1/4" shaft fits into chuck 1/2" threaded end. Order buffing...

TAPERED BUFFING SPINDLE 5/8" LEFT

Tapered Buffing Spindles are ideal for mounting buffing wheels with pinhole centers, such as our Razor Buff. Simply attach the spindle onto your 1/2" or 5/8" shaft, tighten the grub screws, and the...

TAPERED BUFFING SPINDLE 5/8" RIGHT

Tapered Buffing Spindles are ideal for mounting buffing wheels with pinhole centers, such as our Razor Buff. Simply attach the spindle onto your 1/2" or 5/8" shaft, tighten the grub screws, and the...

TAPERED BUFFING SPINDLE 1/2" LEFT

Tapered Buffing Spindles are ideal for mounting buffing wheels with pinhole centers, such as our Razor Buff. Simply attach the spindle onto your 1/2" or 5/8" shaft, tighten the grub screws, and the...

TAPERED BUFFING SPINDLE 1/2" RIGHT

Tapered Buffing Spindles are ideal for mounting buffing wheels with pinhole centers, such as our Razor Buff. Simply attach the spindle onto your 1/2" or 5/8" shaft, tighten the grub screws, and the...

SHAFT EXTENDER 3/4" BORE RIGHT HAND

Designed especially for larger buffing & polishing units. The wide shoulder provides plenty of clearance plus ample space for easy movement & positioning of work pieces. Slides onto 3/4"...