Caswell

CARTRIDGE ROLL REGULAR 80 GRIT

Cartridge rolls are cylinders of abrasive cloth, which allow a new cutting surface to be uncovered as each layer is worn away. Good for cylinder head polishing, flash removal, deburring, tool-mark...

CARTRIDGE ROLL REGULAR 120 GRIT

Cartridge rolls are cylinders of abrasive cloth, which allow a new cutting surface to be uncovered as each layer is worn away. Good for cylinder head polishing, flash removal, deburring, tool-mark...

CARTRIDGE ROLL KIT

Cartridge rolls are cylinders of abrasive cloth, which allow a new cutting surface to be uncovered as each layer is worn away. Good for cylinder head polishing, flash removal, deburring, tool-mark...

RUBBER SANDING DRUM - 3 Inch

Quick Lock Drums are simple and fast to use. Just turn the rubber cylinder to secure or loosen the sleeve.  3 Inch Diameter *needs wrench to tighten

QUICKLOCK SANDING DRUM 2 x 1.5 x 1/4"

Quick Lock Drums are simple and fast to use. Just turn the rubber cylinder to secure or loosen the sleeve. No tools are needed!

QUICKLOCK SANDING DRUM 1.5 x 1.5 x 1/4"

Quick Lock Drums are simple and fast to use. Just turn the rubber cylinder to secure or loosen the sleeve. No tools are needed!

QUICKLOCK SANDING DRUM 1 x 1 x 1/4"

Quick Lock Drums are simple and fast to use. Just turn the rubber cylinder to secure or loosen the sleeve. No tools are needed!

QUICKLOCK SANDING DRUM 1/2 x 1/2 x 1/4"

Quick Lock Drums are simple and fast to use. Just turn the rubber cylinder to secure or loosen the sleeve. No tools are needed!

FLAPPER ADAPTER - STANDARD - STAINLESS

The Flapper Adapter mounts onto any angle grinder with a 5/8 - 11 shaft (almost all grinders), and allows you to mount any wheel with a 1/4" shaft onto your angle grinder. Mount flap wheels, cutoff...

GRINDER/BUFFER ADAPTER 5/8-11 TO 1/2

This handy accessory fits a 5/8" shaft to extend the stubby shaft out 3" further from the motor body. Shaft size = 1/2" diam. The adapter will fit buffing wheels up to 1 inch thick    

BENCH MANDREL - 1/2

Attach these mandrels to an electric motor with a V Belt to make a HIGH QUALITY, low cost work station for various sanding, polishing and buffing operations. Will run wheels up to 1" thick...

BENCH MANDREL - 5/8 SHAFT

Attach these mandrels to an electric motor with a V Belt to make a HIGH QUALITY, low cost work station for various sanding, polishing and buffing operations. Will run wheels up to 1" thick...

CHUCK ADAPTER 0 - 1/2 C-4

This handy accessory turns an ordinary motor into a bench mounted drill. Just attach this adapter any 1/2" right threaded shaft or one of our shaft extenders. The Chuck Adapter is seen here fitted to...

CHUCK ADAPTER 0 - 1/4 C-2

This handy accessory turns an ordinary motor into a bench mounted drill. Just attach this adapter any 1/2" right threaded shaft or one of our shaft extenders. The Chuck Adapter is seen here fitted to...

ARBOR ADAPTER

These sturdy adapters are great for mounting, wire wheel brushes, grinding wheels, cut off wheels, buffs etc onto any chuck power tool. 1/4" shaft fits into chuck 1/2" threaded end. Order buffing...