Replenishment Chemicals and Anodes

GP PLATE - 20" x 20" x 1/32"

"General Purpose" plates. Ideal for larger anodizing systems (use as cathodes), or stripping tanks. Lead sheet is 1/32" thick. Can also be used as an anode when chrome plating.

MASK IT MASKING LACQUER - 8OZ

Caswell Mask It Masking Lacquer is an optically Blue Tinted acid resistant, peelable coating used where an acid resistant protective coating is required. Various applications include: protection of surfaces during fabrication and milling operations,...

NICKEL ACTIVATOR - 1 PINT

Use to activate a nickel plated surface before gold, silver, nickel or copper plating. Simply swab the activator over the nickel, rinse, then plate. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

NICKEL ACTIVATOR - 1 QUART

Use to activate a nickel plated surface before gold, silver, nickel or copper plating. Simply swab the activator over the nickel, rinse, then plate. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

NICKEL ANODE 6 x 8

Nickel Anode 6" x 8"

NICKEL CRYSTALS W/BRIGHTENER 1.5 GAL

Regular Nickel Crystals w/Brightener 1.5 Gal

NICKEL/COPY CHROME BRIGHTENER - 1 PT

Treats 3 gallons Nickel or 1.5 gallons Copy Chrome

NICKEL/COPY CHROME BRIGHTENER - 1 QUART

Nickel/Copy Chrome™ Brightener 1 Quart Treats 6 Gal

NICKEL/COPY CHROME BRIGHTENER 8OZ

Nickel/Copy Chrome™ Brightener - 8 oz Treats 1.5 Gal

SILVER PLATING CONCENTRATE A 1 QT

Use in conjunction with Silver Plating Solutions B and Conditioner. (96oz A:10oz B:86oz Distilled Water=1.5 Gals)

SP DEGREASER - 10 LBS

The correct surface preparation prior to plating is of the utmost importance. Slight traces of grease or oil, even finger prints, can completely ruin a good plating job. Yet most commercial systems use harsh alkaline cleaner that are tough to handle and...

STAINLESS STEEL ANODE 4" x 8"

Stainless Steel Anode 4" x 8"

TIN PLATING CONCENTRATE - Makes 1.75 Gallons

Makes 1.75 Gallons Tin Electroplating Solution. Mix 6.7oz Concentrate, 1 Pint Activator, 2 Qts Battery Acid and 3.5 Qts Distilled Water

ZINC BRIGHTENER ADDITIVE - 4 OZ

ZINC BRIGHTENER ADDITIVE For use with Caswell Zinc Plating ProcessAdd 1/2 teaspoons per 1.5 gal of plating solution. When plate becomes dull, add another 1/2 teaspoon. ***Do Not Add Entire Contents. ***Use Sparingly.

ZINC/COPY CAD CONC W/BRITE - 10.5 GAL

Mix 13 ounces of part A with 36 ounces of Copy Cad/Zinc Part B and 1.5 gallons of distilled water. Refer To Manual For Complete Instructions.