Other Chemicals

Aluminum Degreaser Powder - 2lb Makes 3 Gallons

This special degreaser for Aluminum quickly cleans any aluminum alloy without etching. Mix 2 lbs of cleaner with 3 gallons of distilled water in a stainless steel container. Heat to 130 deg F on a hotplate. Immerse aluminum parts for 3-10 minutes prior...

COPPER BRIGHTENER PART A - 1.5 OZ

Treat 1.5 gallons. Add when making up copper solution for the first time.

COPPER BRIGHTENER PART B - 4 OZ

Add 0.3 floz Copper Brightener Part B per 1.5 Gals Initial Bath Copper Plating Solution Add 0.1-0.3 floz Copper Brightener Part B as required to maintain brightness.

FLASH COPPER PART B - 1 PT

Flash Copper Solution Part B - 1 Pint

FLASH COPPER PART C - 1PT (LTD-QTY)

Flash Copper Solution Part C - 1 Pint

FLASH COPPER SOLUTION PART A - 1 GAL

Flash Copper Solution Part A - 1 Gal

FLASH COPPER SOLUTION PART A - 1 QT

Flash Copper Solution Part A - 1 Quart

MASK IT MASKING LACQUER - 8OZ

Caswell Mask It Masking Lacquer is an optically Blue Tinted acid resistant, peelable coating used where an acid resistant protective coating is required. Various applications include: protection of surfaces during fabrication and milling operations,...

NICKEL ACTIVATOR - 1 PINT

Use to activate a nickel plated surface before gold, silver, nickel or copper plating. Simply swab the activator over the nickel, rinse, then plate. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

NICKEL ACTIVATOR - 1 QUART

Use to activate a nickel plated surface before gold, silver, nickel or copper plating. Simply swab the activator over the nickel, rinse, then plate. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

NICKEL/COPY CHROME BRIGHTENER - 1 PT

Treats 3 gallons Nickel or 1.5 gallons Copy Chrome

NICKEL/COPY CHROME BRIGHTENER - 1 QUART

Nickel/Copy Chrome™ Brightener 1 Quart Treats 6 Gal

NICKEL/COPY CHROME BRIGHTENER 8OZ

Nickel/Copy Chrome™ Brightener - 8 oz Treats 1.5 Gal

SP DEGREASER - 2 LBS

The correct surface preparation prior to plating is of the utmost importance. Slight traces of grease or oil, even finger prints, can completely ruin a good plating job. Yet most commercial systems use harsh alkaline cleaner that are tough to handle and...

ZINC BRIGHTENER ADDITIVE - 4 OZ

ZINC BRIGHTENER ADDITIVE For use with Caswell Zinc Plating ProcessAdd 1/2 teaspoons per 1.5 gal of plating solution. When plate becomes dull, add another 1/2 teaspoon. ***Do Not Add Entire Contents. ***Use Sparingly.