Replenishment Chemicals and Anodes

SILVER BRUSH PLATING SOLUTION 1QT

Caswell Silver is a new type of alkaline cyanide free silver plating solution that will plate over nickel, sterling silver, gold, rhodium, copper, brass and bronze. The system will provide uniform color consistency and even coverage. It is important when...

SILVER PLATING CONCENTRATE A 1 QT

Use in conjunction with Silver Plating Solutions B and Conditioner. (96oz A:10oz B:86oz Distilled Water=1.5 Gals)

SILVER PLATING CONCENTRATE B 1 QT

Use in conjunction with Silver Plating Solutions A and Conditioner.

SILVER PLATING CONDITIONER 1 QT

Use in conjunction with Silver Plating Solutions A and B.

SP DEGREASER - 10 LBS

The correct surface preparation prior to plating is of the utmost importance. Slight traces of grease or oil, even finger prints, can completely ruin a good plating job. Yet most commercial systems use harsh alkaline cleaner that are tough to handle and...

SP DEGREASER - 2 LBS

The correct surface preparation prior to plating is of the utmost importance. Slight traces of grease or oil, even finger prints, can completely ruin a good plating job. Yet most commercial systems use harsh alkaline cleaner that are tough to handle and...

STAINLESS STEEL ANODE 4" x 8"

Stainless Steel Anode 4" x 8"

TIN ANODE .032 x 4 x 8

4" x 8" x 0.032" Thick Tin Anode for Tin Electroplating

TIN ANODE .062x18x18

Tin Anode 18" x 18" (Large)

TIN PLATING ACTIVATOR - 1 PINT

Add to 6.7oz Tin Plating Concentrate to make 1.75 Gals Tin Plating Solution. (6.7oz Concentrate:1 Pint Activator:2 Qts Battery Acid:3.5 Qts Distilled Water)

TIN PLATING CONCENTRATE - Makes 1.75 Gallons

Makes 1.75 Gallons Tin Electroplating Solution. Mix 6.7oz Concentrate, 1 Pint Activator, 2 Qts Battery Acid and 3.5 Qts Distilled Water

Tin Plating Concentrate 1 Gal makes 8 Gal

Mix 3.5 qts of distilled water and 2 qts of battery acid, then add 1 Quart concentrate and 1 Pint activator. Makes 1.75 gallons. CAUTION: Add acid to water, not water to acid.

TITANIUM ANODIZING POWDER - 1 GAL (1LB)

For use with our Titanium Anodizing Kit. Replace spent solution or increase the size of your system. Drain Safe.

Woods Nickel Strike Plating Crystals - 1.5 Gal

Use as a pre-plate to allow nickel or electroless nickel plating onto Stainless Steel. Mix with 1.5 Gallons of distilled water and electroplate with a nickel anode at .07 amps per square inch for approx 20 mins.

ZINC & COPY CAD CONCENTRATE - MAKES 39G

Mix 13 ounces of part A with 36 ounces of Copy Cad/Zinc Part B and 1.5 gallons of distilled water. Refer To Manual For Complete Instructions.