Plating Kits

Copy Chrome Kit - 3 Gal

Copy Chrome™ Kit Improved More Complete Kit - New, Bigger SizesLooks Like ChromeHard Like Chrome - Tougher Than Nickel!Keeps Its Shine - Just Like Chrome!No Dangerous Chemicals - No Fumes - No Corrosive Acids One coat system - eliminates 2 steps!...

Copy Chrome Kit - 4.5 Gal

Copy Chrome™ Kit Improved More Complete Kit - New, Bigger SizesLooks Like ChromeHard Like Chrome - Tougher Than Nickel!Keeps Its Shine - Just Like Chrome!No Dangerous Chemicals - No Fumes - No Corrosive Acids One coat system - eliminates 2 steps!...

Copy Chrome/Acid Copper Combo Kit - 1.5 Gal

Includes a 1.5 Gal Copy Chrome Plating Kit and a 1.5 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then polish and Copy Chrome plate. 1.5 Gallon Kit...

Copy Chrome/Acid Copper Combo Kit - 15 Gal

Includes a 15 Gal Copy Chrome Plating Kit and a 15 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then polish and Copy Chrome plate. 15 Gallon Kit Contains: ...

Copy Chrome/Acid Copper Combo Kit - 3 Gal

Includes a 3 Gal Copy Chrome Plating Kit and a 3 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then polish and Copy Chrome plate. 3 Gallon Kit Contains: 3 x...

Copy Chrome/Acid Copper Combo Kit - 4.5 Gal

Includes a 4.5 Gal Copy Chrome Plating Kit and a 4.5 Gal Acid Copper Plating Kit. Useful to put a heavy layer of copper plating over non-ferrous metals (copper, brass, bronze, zincated aluminum), then polish and Copy Chrome plate. 4.5 Gallon Kit...

Copy Chrome/Flash Copper Combo Kit - 1.5 Gal

Includes a 1.5 Gal Copy Chrome Plating Kit and a 1.5 Gal Flash Copper Plating Kit. Ideal for nickel plating ferrous metals like steel, iron & diecast/pot metal parts, where an alkaline copper strike is required before Copy Chrome plating. 1.5 Gallon Kit...

Copy Chrome/Flash Copper Combo Kit - 15 Gal

Includes a 15 Gal Copy Chrome Plating Kit and a 15 Gal Flash Copper Plating Kit. Ideal for nickel plating ferrous metals like steel, iron & diecast/pot metal parts, where an alkaline copper strike is required before Copy Chrome plating. 15 Gallon Kit: ...

Copy Chrome/Flash Copper Combo Kit - 3 Gal

Includes a 3 Gal Copy Chrome Plating Kit and a 3 Gal Flash Copper Plating Kit. Ideal for nickel plating ferrous metals like steel, iron & diecast/pot metal parts, where an alkaline copper strike is required before Copy Chrome plating. 3 Gallon Kit: 3 x...

Copy Chrome/Flash Copper Combo Kit - 4.5 Gal

Includes a 4.5 Gal Copy Chrome Plating Kit and a 4.5 Gal Flash Copper Plating Kit. Ideal for nickel plating ferrous metals like steel, iron & diecast/pot metal parts, where an alkaline copper strike is required before Copy Chrome plating. 3 x 6 Gal...

DECORATIVE CHROME CRYSTALS - 10.5GALS

READ MSDS BEFORE OPENINGMix with 1.5 Gal distilled water and one 6 fl oz bottle of Chrome Plating Catalyst.

Decorative Chrome Crystals and Catalyst 1.5 Gal

Mix with 1.5 Gal distilled water and one 6 fl oz bottle of Chrome Plating Catalyst. Not available to residents of California unless an appropriate permit has been obtained. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to...

Deoxidizer/Desmut - 1 Quart

1 Quart mixes with 2 gallons of water. Use to minimize smutting of aluminum parts before anodizing or plating. Use at 70-110 deg F, for 1-3 minutes. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

Die Cast Model Plating Kit

Zinc die-castings have, until now, been a difficult material to plate for the small operation. Die-casting manufacturers have used dangerous chemicals and cyanide copper...

DIGITAL RECTIFIER - 3 AMP

Buy 3 Units, Get the 3rd Unit Half Price 3 Amp Constant Current Rectifier Constant current/voltage power control This new system has the latest technology for small plating and anodizing operations. The constant current control is...