Plating Kits

Flash Copper Plating Kit - 3 Gals

Flash Copper™ Plating Kit Improved Formula Provides Better Adhesion and Finer Plate Plates directly on steel, copper, brass, stainless steel, zincated aluminum, tin, nickel, electroless nickel and sulfamate nickel as well as die-cast zinc surfaces -...

Flash Copper Plating Kit - 4.5 Gals

Flash Copper™ Plating Kit Improved Formula Provides Better Adhesion and Finer Plate Plates directly on steel, copper, brass, stainless steel, zincated aluminum, tin, nickel, electroless nickel and sulfamate nickel as well as die-cast zinc surfaces -...

FLASH COPPER SOLUTION PART A - 1 GAL

Flash Copper Solution Part A - 1 Gal

FLASH COPPER SOLUTION PART A - 1 QT

Flash Copper Solution Part A - 1 Quart

GP PLATE - 20" x 20" x 1/32"

"General Purpose" plates. Ideal for larger anodizing systems (use as cathodes), or stripping tanks. Lead sheet is 1/32" thick. Can also be used as an anode when chrome plating.

GP PLATES 8 x 8

"General Purpose" plates. Ideal for larger anodizing systems (use as cathodes), or stripping tanks. Lead sheet is 1/32" thick. Can also be used as an anode when chrome plating.

Hard Chrome Plating Kit - 1 Gal

Hard Chrome Plating Kit Chrome plating can be used for two purposes: Hard Chrome Plate Usually used to build up shafts or areas on steel that are subject to severe wear. The hard chrome plating process can take several hours to build up. The procedure...

LIQUID DEGREASER CONCENTRATE GAL

The correct surface preparation prior to plating is of the utmost importance. Slight traces of grease or oil, even finger prints, can completely ruin a good plating job. Yet most commercial systems use harsh alkaline cleaner that are tough to handle and...

MASK IT MASKING LACQUER - 8OZ

Caswell Mask It Masking Lacquer is an optically Blue Tinted acid resistant, peelable coating used where an acid resistant protective coating is required. Various applications include: protection of surfaces during fabrication and milling operations,...

Mist Control Balls - 2 sq ft

Due to the high current usage during chrome plating, a mist of acid is produced from the tank. This can become a nuisance due to the corrosive nature of the product and its yellow stain. The Complete Plating Manual shows how to control...

NICKEL ACTIVATOR - 1 PINT

Use to activate a nickel plated surface before gold, silver, nickel or copper plating. Simply swab the activator over the nickel, rinse, then plate. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

NICKEL ACTIVATOR - 1 QUART

Use to activate a nickel plated surface before gold, silver, nickel or copper plating. Simply swab the activator over the nickel, rinse, then plate. Contains Hazardous Goods. Shipping restrictions apply. Ground shipping only to the Continental USA...

NICKEL ANODE 6 x 8

Nickel Anode 6" x 8"

NICKEL CRYSTALS W/BRIGHTENER 1.5 GAL

Regular Nickel Crystals w/Brightener 1.5 Gal

Nickel Electroforming Kit - 1.5 Gal

New Sulfamate Nickel Formula Electroforming is a process where electroplating is used to create entire parts out of a certain metal, using molds or dies. Electroforming can be achieved with our acid copper plating process, and now, with our new Nickel...