Paints Coatings

BLACK OXIDE CONCENTRATE 1 QT

Blackens steel and iron parts (not stainless steel). Parts must be sealed after blackening. Use our Penetrating Sealer or Caswell Sealer. Mix 1 part Concentrate with 9 parts distilled water. 1 quart of concentrate makes 2.5 gallons of blackening solution...

Bronze & Blackening Solution 8 fl oz

Bronze & Blackening Solution For use on Copper and Silver. Mix 1-2 fluid oz of Concentrate to 1 gal water depending on degree of effect required. Use at room temperature. Dip item into solution for 5-10 seconds, longer for darker effect. Rinse to stop...

GREEN MASKING 1/2" DOTS - 2000 PER ROLL

2 mil thick, 1/2" Diameter Polyester Dots Ideal for masking screw holes etc. Perfect for Powder coating, anodizing, plating, painting Withstands Up to 400°F

HANDHELD IR THERMOMETER

Probably the most useful tool in any powder coater's toolbox - accurate temperature readings are essential to good coatings. Curing cycles are determined by part temperature, not oven temperature, and there's no way to accurately measure part temperature...

High Temp PC Tape - 1"

High Temperature Masking Tape Polyimide tape is perfect for high temperature masking needs. Withstands temps up to 600F. Copper colored Maximum Temperature: 500F Total Thickness: 2 mils Excellent Electrical Insulation

High Temp PC Tape - 1/2"

High Temperature Masking Tape Polyimide tape is perfect for high temperature masking needs. Withstands temps up to 600F. Copper colored Maximum Temperature: 500F Total Thickness: 2 mils Excellent Electrical Insulation

High Temp PC Tape - 2"

High Temperature Masking Tape Polyimide tape is perfect for high temperature masking needs. Withstands temps up to 600F. Copper colored Maximum Temperature: 500F Total Thickness: 2 mils Excellent Electrical Insulation

IRON PHOSPHATE PRIMER - 1 GALLON

Increase the corrosion resistance of your powder coated parts. Caswell Iron Phosphate Primer is a concentrated liquid, multiple temperature, detergent iron phosphate. It provides metal surfaces with a unique underpaint corrosion resistance and prepares...

IRON PHOSPHATE PRIMER - 1 PINT

Increase the corrosion resistance of your powder coated parts. Caswell Iron Phosphate Primer is a concentrated liquid, multiple temperature, detergent iron phosphate. It provides metal surfaces with a unique underpaint corrosion resistance and prepares...

Permalac Black Acrylic Paste Additive - 1 Quart

Permalac Black Acrylic Paste Additive This black acrylic paste additive can be used to yield a solid black finish if you wish to tint the Permalac yourself. To obtain an opaque black effect, add approximately 1 oz of black paste for every 8 fluid ounces...

Permalac Flattening Wax - 1 Quart

Permalac Flattening Wax is a pre-dispersed flattening paste that is compatible with all Permalac products. Add 2 to 10 ounces of Permalac Flattening Wax to 1 gallon of Permalac to achieve your desired level of flattening. 1-quart package.

Permalac Low VOC Thinner

Low VOC Thinner is a medium speed lacquer thinner formulated with VOC-exempt solvents. Designed for use with Permalac EF or Permalac NT. Use when the ambient temperature is 55°F to 88°F. When spraying, thin between 20-50%. If the Permalac is...

Permalac NT - Ultra-Low VOC Clearcoat

We've taken Permalac Original & made it even better!  Introducing Permalac NT Permalac NT Clear Coat is a Direct-to-Metal ultra-low VOC Clear Coat that meets the rigorous performance requirements of the Green Seal standards...

Permalac NT Blackener - Transparent Black Clearcoat

Permalac NT Blackener is a transparent Black Clear Coat used to darken light colored steel or metal. It has a black patina/blackened metal appearance after applied & is often used in place of acids that have been used in the past to create...

Permalac NT Copper Matte

Permalac NT Copper Matte is available in either 1 quart cans or a 4 quart bundle. This color is good to go over roofs & such to make them look like copper or match other copper items while protecting the metal surface. It is only available in Matte...