Replenishment Chemicals and Anodes

SP DEGREASER - 10 LBS

The correct surface preparation prior to plating is of the utmost importance. Slight traces of grease or oil, even finger prints, can completely ruin a good plating job. Yet most commercial systems use harsh alkaline cleaner that are tough to handle and...

SP DEGREASER - 2 LBS

The correct surface preparation prior to plating is of the utmost importance. Slight traces of grease or oil, even finger prints, can completely ruin a good plating job. Yet most commercial systems use harsh alkaline cleaner that are tough to handle and...

STAINLESS STEEL ANODE 4" x 8"

Stainless Steel Anode 4" x 8"

TIN PLATING CONCENTRATE - Makes 1.75 Gallons

Makes 1.75 Gallons Tin Electroplating Solution. Mix 6.7oz Concentrate, 1 Pint Activator, 2 Qts Battery Acid and 3.5 Qts Distilled Water

ZINC AND COPY CAD ANODE 4 x 8 x 0.040

Zinc and Copy Cad® Anode 4" x 8"

ZINC BRIGHTENER ADDITIVE - 4 OZ

ZINC BRIGHTENER ADDITIVE For use with Caswell Zinc Plating ProcessAdd 1/2 teaspoons per 1.5 gal of plating solution. When plate becomes dull, add another 1/2 teaspoon. ***Do Not Add Entire Contents. ***Use Sparingly.

ZINC/COPY CAD CONC W/BRITE - 10.5 GAL

Mix 13 ounces of part A with 36 ounces of Copy Cad/Zinc Part B and 1.5 gallons of distilled water. Refer To Manual For Complete Instructions.

ZINCATE CONCENTRATE - 1 LITER

You Can't Plate Aluminum Without Zincate Pre-Treatment For Aluminum Using CASWELL Zincate Solution, aluminum can be pre-treated, and then plated in one of our plating kits. The problem is that aluminum forms an oxide layer the minute it is...

ZINCATE CONCENTRATE - 8 OZ

You Can't Plate Aluminum Without Zincate Pre-Treatment For Aluminum Using CASWELL Zincate Solution, aluminum can be pre-treated, and then plated in one of our plating kits. Aluminum forms an oxide layer the minute it is exposed to air. This presents a...