Paints Coatings

Permalac Black Acrylic Paste Additive - 1 Quart

Permalac Black Acrylic Paste Additive This black acrylic paste additive can be used to yield a solid black finish if you wish to tint the Permalac yourself. To obtain an opaque black effect, add approximately 1 oz of black paste for every 8 fluid ounces...

Permalac Flattening Wax - 1 Quart

Permalac Flattening Wax is a pre-dispersed flattening paste that is compatible with all Permalac products. Add 2 to 10 ounces of Permalac Flattening Wax to 1 gallon of Permalac to achieve your desired level of flattening. 1-quart package.

Permalac Low VOC Thinner

Low VOC Thinner is a medium speed lacquer thinner formulated with VOC-exempt solvents. Designed for use with Permalac EF or Permalac NT. Use when the ambient temperature is 55°F to 88°F. When spraying, thin between 20-50%. If the Permalac is...

Permalac NT - Ultra-Low VOC Clearcoat

We've taken Permalac Original & made it even better!  Introducing Permalac NT Permalac NT Clear Coat is a Direct-to-Metal ultra-low VOC Clear Coat that meets the rigorous performance requirements of the Green Seal standards...

Permalac NT Blackener - Transparent Black Clearcoat

Permalac NT Blackener is a transparent Black Clear Coat used to darken light colored steel or metal. It has a black patina/blackened metal appearance after applied & is often used in place of acids that have been used in the past to create...

Permalac NT Copper Matte

Permalac NT Copper Matte is available in either 1 quart cans or a 4 quart bundle. This color is good to go over roofs & such to make them look like copper or match other copper items while protecting the metal surface. It is only available in Matte...

Permalac NT Low Odor Thinner

NT Low Odor Thinner This is a VOC-exempt thinner best used with the Permalac NT. Use when the ambient temperature is 55°F to 88°F. When spraying, thin between 20-50%. If the Permalac is drying too quickly, and you notice blush or any other...

Permalac NT Opaque Black

Permalac NT Black is a fast-drying, easy-to-apply acrylic lacquer coating. It is an opaque tinted, low VOC formula which lays down similar to a paint. Permalac NT Black is highly resistant to environmental breakdown caused by UV, acid rain, and salt. ...

Permalac Original - Direct-To-Metal Clear Coat

PERMALAC ORIGINAL  Direct-To-Metal Clear Coat Neither Water, Wind, Rain, Hail, UV or Salt Water Air will stop Permalac!  Fountain of the Muses, 15 life-size Bronze Sculptures, is one of the most visited...

Permalac Retarding Thinner

Retarding Thinner can be added to the Permalac Original, Permalac EF, or Permalac NT. It should be used to extend flow time and prevent solvent blush when working in high temperatures or high relative dew points. This will make Permalac take around an...

Permalac SR - Scratch Resistant Top Coat

Permalac SR is a 'Scratch Resistant' Topcoat that meets California VOC guidelines is currently available in either Satin or Matte.  Permalac SR is applied over any of our Permalac products to provide a scratch resistant...

Permalac Standard Hot/Cold Thinner

Standard Hot/Cold Thinner is a regular speed lacquer thinner. Use when the ambient temperature is 50°F to 65°F. Thin Permalac Original, EF 20% when spraying. No thinner will be needed for brushing unless you notice brush strokes or irregularities.

Permalac Strip Thinner

Permalac Strip Thinner consists of a blend of solvents designed to dissolve and remove cured Permalac Original, Permalac EF, Permalac NT, and Permalac SR from metal surfaces without marring the substrate. This material is composed of VOC-exempt...

Permalac Transparent Colored Lacquers

We have added some transparent/translucent colors to our Permalac line that are meant to be applied over light colored steel or metal for special effects. These products still offer the 5/8 years of protection against corrosion on all steel & metals...

Permalac Transparent Tints

Permlac Transparent Tints Permalac Original, and Permalac NT can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be...