Assembly
Instructions
This is an economical Reverse Osmosis
unit that is compact in size, for situations that require
less space and the benefit of being portable. On average,
this unit will remove 94-98% of tap water contaminants.
It includes a TFC membrane, an IFCE
inline carbon/sediment pre filter, a 3/4 inch garden
hose adapter and 6 feet of yellow, blue and orange
tubing.
This unit can be run on ANY water system, well or city.
RO systems are offered in 10 Gallon Per Day and 35
Gallon Per Day sizes. GPD will vary based on your water
conditions.
Specifications of the 10 Gallon Per Day Unit:
- Length: 14 1/2"
- Width: 5 1/2"
- Height: 3"
- Dry weight: 4.5 lbs
- Optimal input water temp: 70-77°F, 21-25°C
- Optimal PSI: 65
- Optimal Total Dissolved Solids: <200 ppm
- Input water type: Any house water system
- Membrane type: Thin Film Composite, TFC
- Rated Gallons Per Day: 10
- Waste to Product ratio: 4 to 1
- Inhibiting/Damaging tap water chemicals: Iron, Calcium,
Magnesium, Heavy Sediment
- Prefilter media: IFCE; Inline 10µ, solid block
carbon filter
- Post filter media: N/A
- Supplied input water adapter: GHF, ¾ standard
thread
- See Connection Parts for optional adapters
- Tubing type: ¼ pressure tubing
- Filter change times: NOTE: change times are varied
depending on the tap water conditions. Stated times
are an average: TFC membrane: 3 to 5 years, IFCE:
6 months
Flush Kit
 |
The FLUSH KIT enables
the membrane to be flushed with pressurized water
to help remove contaminate buildup and extend
membrane life. This kit comes complete with all
necessary fittings to hook up to the RO system.
Both RO systems includes the Flush Kit. |
TFC Membrane Filter Replacement
TFC Membranes will need to be replaced every 3-5 years.
IFCE Carbon Filter Replacement
IFCE Carbon filters will need to be replaced approximately
every 6 months.
Float Valve Kit
The Float Valve Kit allows an RO to fill a reservoir
to a desired level, then shut down water production
completely. This kit works from pressure only, no electricity.
Included within this kit is a pressure solenoid, float
valve, check valve, a 1/8" elbow,
a male 1/8" x 1/8" connector and 1 foot each
of blue and orange tubing. |
