Learn How To Nickel Plate Using This Kit With Our New E-Class - Now Available
Enroll In Our E-Class For Free When You Purchase A Nickel Plating Kit*
Read More About Our E-Class Here - $99.00 Accessory Package and Power Supply Recommended When Taking E-Class
* - US Customers Only. Purchase Of $99 Accessory Package and Power Supply recommended for full E-Class experience. Read More Here
NEW! IMPROVED
PERFORMANCE NICKEL PLATING KIT
Larger Anodes – give more plating, with more even
results
Plates up to 60 sf of decorative Nickel
Constant auto agitation and filtering with New Pump/filter
included
Simpler Instructions
New Degreaser Tank Included
New HOT heater for Degreaser included
Read This Article From Walnecks Cycle Trader About Our Nickel Kit
Our nickel plating kits are designed to
provide a commercial quality finish on a miniature scale,
in approx. 20 minutes. The finish can be applied as
a final treatment, requiring VERY LITTLE buffing to
obtain a high shine, or as a base for chrome plating.
Nickel plate has a very slight yellow
color to it, but in many applications, if polished,
it can double as a chrome plate.
All our chemicals are pre-weighed, so all you have to
do is to add distilled water. We have tried to keep
the processes as simple as possible and have standardized
everything wherever we can.
Nickel plate may also be applied over a copper plate,
and copper plate will adhere to the nickel. We suggest
you apply copper plate to any areas with large scratches
or pits, repair them using our solder-it pastes and
then nickel plate them. By buffing the copper plate
before nickel plating, you can achieve a very high quality
finish, similar to 'Show Chrome". If this nickel finish
is then chrome plated, the part will be 'Show Chrome'.
All instructions and operating procedures are detailed
in the Complete Plating Manual. Each anode will plate
about 32 sq. ft of surface area at 0.0005" before
it needs to be replaced. The solution is virtually permanent.
No waste chemicals or dangerous fumes are produced.
Nickel Plated Brass Alignment Tool
1.5 Gallon Kit
2 x 2 Gal Plating Tank & Lids
2 x 6" x 8" Nickel Anodes and Bandages
1 x 2lb SP Degreaser (Makes 4 Gal)
1 Pack Nickel Crystals with brighteners (Makes
1.5 Gal)
2 x 300W Ceramic Heaters
1 x Thermostat
1 x Pump Filter/Agitator
The Complete Plating Manual
Free Technical Support
3 Gallon Kit
2 x 3.5 Gal Plating Tank & Lids
2 x 6" x 8" Nickel Anodes and Bandages
1 x 2lb SP Degreaser (Makes 4 Gal)
2 Packs Nickel Crystals with brighteners (Makes
3 Gal)
2 x 300W Ceramic Heaters
1 x Thermostat
1 x Pump Filter/Agitator
The Complete Plating Manual
Free Technical Support
4.5 Gallon Kit
2 x 6 Gal Plating Tank & Lids
2 x 6" x 8" Nickel Anodes and Bandages
2 x 2lb SP Degreaser (Makes 8 Gal)
3 Packs Nickel Crystals with brighteners (Makes
4.5 Gal)
2 x 300W Ceramic Heaters
1 x Thermostat
1 x Pump Filter/Agitator
The Complete Plating Manual
Free Technical Support
15 Gallon Kit
2 x 20 Gal Plating Tank & Lids
2 x 18" x 20" Nickel Anodes and
Bandages
8 x 2lb Packs SP Degreaser (makes 16 Gals)
10 Packs Nickel Crystals with brighteners
(Makes 15 Gals)
6 x 300W Ceramic Heaters
1 x Thermostat
1 x Pump Filter/Agitator
The Complete Plating Manual
Free Technical Support
Improved Brighteners
NEW!! CASWELL NICKEL/COPY CHROME™ BRIGHTENER will
produce highly ductile deposits, which are free from laminations.
It produces brilliant, white deposits of high clarity, reflectivity
and depth. The deposit is active and can be chromium plated
if specified.
Superior ‘leveling’ properties enable fine
scratches and imperfections to be filled, enhancing the overall
finish.
Our regular Nickel & Copy Chrome™ now plates
faster with more coverage in the low current density area.
It produces 20 to 30% more thickness in the lower current
density area than any other system. If you are chrome plating
onto this nickel, you will also get better chrome coverage
in the low current density than any other nickel process.
Now Available - Nickel Plating Accessory Package
The accessory package includes most everything you need to start using the kit immediately, and some supplies to practice on. The copper pipes serve as your tank bars and practice pieces. The aluminum strips serve as practice pieces. Includes Zincate, so you can nickel plate onto aluminum and a polishing kit that will polish most metals.
The Accessory Package Contains:
2 x Copper Pipes (6"L x 1/2" dia)
2 X Aluminum Strips (6"L x 1" dia)
Connecting lead set to connect the power supply to the plating tank
Safety glasses and rubber gloves
6' of bare copper wire (to hang items into the tank)
1 Quart Zincate (to pretreat the aluminum practice pieces)
