These professional quality anodizing dyes
provide consistent, quality results. The same dyes are
sold to professional anodizing shops all over the world.
Each 4oz bottle of dye concentrate makes 2 Gallons.
| 
|
Each anodizing kit is supplied
with a color wheel. Dyes can be mixed together to
create a host of different colors. The dyes are
in concentrated liquid form, a 4oz bottle makes
up 2 gals of ready to use dye. To make up different
colors, we suggest that you make up the colors to
the correct dilution first, then take a quantity
of each dye and blend them together. |
These colors are approximate. The finish
will normally have a more 'metallic' look, and will
vary slightly depending on the alloy and surface preparation.
Procedure for Obtaining
Dyed Anodize
Anodize the aluminum at 60-75°F for 90 minutes
at 4.5 amps per sq foot or 0.03 amps per sq inch. Use
our Anodizing Kit.
After thorough rinsing, immerse the part in the dye
at a temperature of 140°F for 15 minutes.
Finally, seal by hanging the part in a sealer bath
for 15 minutes.
Note: All dyes are suitable for high temp and low temp
sealants, except Grey BL and Yellow 4A, which should
not be sealed using LT Sealer.
|
