Clear Vinyl Stain Reducer

Stains and yellowing vanish in seconds!

Diamondite Clear Vinyl Stain Reducer removes stains and yellowing to restore the clear, clean shine of soft vinyl windows. Just spray it on and watch discoloration vanish. There’s no faster, easier way to restore the like-new appearance of soft, clear vinyl windows on convertible tops, boats and soft-top Jeeps.

Clear vinyl windows on convertible tops, jeeps, and boats contain UV stabilizers and plasticizers to keep the material soft and supple. While these additives prolong the life of vinyl, they can’t stop the aging process. Ultraviolet light causes plasticizers to leach out of vinyl little by little. Vinyl windows can become yellow and brittle in 2-3 years, but the convertible top itself may last for much longer.

Diamondite Clear Vinyl Stain Reducer is the first step in the Diamondite Clear Vinyl Kit. The solvent in Clear Vinyl Stain Reducer starts removing the yellow film and stains on contact. Clear Vinyl Stain Reducer lifts dirt and oils out of the vinyl’s pores to immediately improve its clarity. (Next, you’ll use Diamondite Clear Vinyl Cleanser to remove cloudiness and any remaining yellow hue.)

Directions:

• Tape off the area surrounding the vinyl with painter’s tape.
• Spray the vinyl window generously with Diamondite Clear Vinyl Stain Remover. Allow it to sit for 10 seconds.
• Wipe the window dry with a soft microfiber towel. If some stains or yellowing are still present, perform a second application. Some discoloration will require step 2, Diamondite Clear Vinyl Cleanser, to completely clean the vinyl.

Clear Vinyl Cleanser

The most gentle cream cleanser for vinyl windows and eisenglass.

Diamondite Clear Vinyl Cleanser is a nonabrasive cream that gently removes vinyl haze and cloudiness from convertible top windows, boat windows, and Jeep® soft-tops. This is the second step and most crucial step of the Diamondite Clear Vinyl Kit.

Vinyl damage is often two-fold: it clouds and turns yellow. Even after Clear Vinyl Stain Reducer has removed discoloration, the vinyl may not be optically clear. That’s the job of Diamondite Clear Vinyl Cleanser. This nonabrasive cleanser gently polishes the vinyl to remove the remaining haze and restore the crystal clear visibility. Fine scratches will disappear, leaving smooth, clear vinyl once again.

Restore vinyl windows on Jeeps, convertibles, and boats with the safest vinyl cleanser and restorer you can buy. Diamondite Clear Vinyl Cleanser works like a gentle clarifying lotion to remove cloudiness and restore the transparency to clear vinyl.

Directions:

By drill:

1. Attach the included backing plate onto an electric drill using the included adapter. Tighten the adapter onto the backing plate using a wrench. Press the orange foam pad onto the backing plate.
2. Dispense an X of Clear Vinyl Cleanser across the pad.
3. Place the pad against the vinyl and gradually increase the speed 1800 RPM. Work in an overlapping motion over a small area. When the polish starts to dry, turn the drill off and lift it off the vinyl.
4. Wipe off all residue with a microfiber towel. Continue polishing until you’ve completed the entire window.

By hand:

1. Apply a quarter size amount of Diamondite Clear Vinyl Cleanser to a foam applicator pad, such as the Tri-color applicator included in the Diamondite Clear Vinyl Kit for Hand Application. (If using this applicator, use the white polishing foam.) Rub back and forth until the cleanser begins to dry.
   
2. Buff the vinyl clean with a soft, clean Cobra Microfiber Towel.
3. Apply a coat of Diamondite Clear Vinyl Shield to seal in the clear shine.

Clear Vinyl Shield

Clear vinyl now and in the future.

Protection is the key to maintain clear vinyl windows. Diamondite Clear Vinyl Shield is a water-based polymer formula that defends vinyl against the ravages of UV rays, water, and pollution.

Diamondite Clear Vinyl Shield is a polymer sealant formulated specifically for the needs of clear vinyl. Clear vinyl does not have a top coat but it does have UV absorbers and plasticizers to keep it soft. Oil-based products actually cause the remaining plasticizers to leach out of the vinyl, and the oil leaves streaks.

Diamondite Clear Vinyl Shield is water-based to create a perfectly transparent, protective barrier between the vinyl and the environment. Specialized Polymers encapsulate the plasticizers to retain them within the vinyl and thereby maintain the vinyl’s suppleness and flexibility. This technology is proven to prevent the yellowing and cracking seen with so many vinyl boat enclosures and convertible windows.

Polymer protection is a crucial part of maintaining the vinyl because any factory protection has already diminished. Diamondite Clear Vinyl Shield works with the remaining plasticizers to preserve the vinyl’s texture. Plus, Clear Vinyl Shield restores the vinyl’s UV protection to factory levels.

Use Diamondite Clear Vinyl Shield on Jeep soft top windows, convertible top windows, and marine eisenglass to protect these surfaces from environmental degradation. The longevity of factory protection varies according to environment and use. To ensure consistent protection, start treating clear vinyl surfaces from the beginning of ownership.

Directions:

1. Mist the window with Diamondite Clear Vinyl Shield. Use a Cobra Microfiber Towel or applicator to spread the sealant over the vinyl. Flip the towel and buff dry. After an hour, you can apply another coat for added protection.
2. Reapply Clear Vinyl Shield once a month to maintain the protection and shine.